|
|
Post by luis782006 on Oct 14, 2019 15:10:42 GMT
Hello guys.
I found VJoy and I did install everything and works fine, but my needed is something else and I will open the thread to see if there is any chances to help me.
I am trying to use the VJoy as a switches buttons for a simulation game. I need to turn on and off a light by a switch, that means that the key it will be press till I need to turning off, I have two keyboards but If I need to use my other keyboard in any windows box in any document, windows will be printing that key all the time till I turning off my switch from the game. For a push button works fine, but for a switch I dont know how to do it.
Regards to all. Luis.
|
|
|
|
Post by Shaul (Admin) on Oct 14, 2019 15:40:32 GMT
Sorry, I find your question unclear.
Let's see what we have.
There are 2 keyboards.
You need to use the keyboards to simulate something. A toggle switch?
But a keyboard does not include a toggle switch.
So you want to use key A as 'on' and key B as 'off'?
I probably don't understand. Can you explain, please?
|
|
|
|
Post by luis782006 on Oct 15, 2019 0:52:28 GMT
Sorry, I find your question unclear.
Let's see what we have.
There are 2 keyboards.
You need to use the keyboards to simulate something. A toggle switch?
But a keyboard does not include a toggle switch.
So you want to use key A as 'on' and key B as 'off'?
I probably don't understand. Can you explain, please?
Hi Shaul
I will explain what happend and what I am needing.
I have a joystick that I disarmed to weld wire to the contact the buttons like that I can use them as switches. I press button 1 and it make an action on my flight sim. Example. Taxilight ON. Like this with the rest of the buttons form my PC Joystick. This works fine. But I need more switches.
I bought a new PC keyboard and I did the same. Pc keyboard works a pusch buttons, so i weld wires to their contacts and to the other side i weld switches.
I configure on Vjoy a new joystick and actually i could find it on windows. Even on my flight sim I could see that I have a new joystick. I go to UCR soft and I configure the buttons pressing key for my second keyboard. This works good.
Then I configure on my flight sim a Taxilight with the L key. So If I swith the buttons 1 from my new VjoyStick that, taxilight win be on. This works too. SO far so good.
The things is that now I am near to the arrival airport with my taxilight ON, i need to check what the weather looks like at tha airport, so minimize the flight sim and I go to internet explore. Then when I click the search box to serach for the wheather, the L is printed infinite. So that means that my second keyboard is taking the L key as pressed, wich is Button#1 in my Vjoy.
I hope I have explained my case clearly.
In case you dont see it. please e mail me o pass me you email to send you some pict to describe better the idea and what happen.
regards and thank you.
Luis
|
|
|
|
Post by Shaul (Admin) on Oct 15, 2019 5:11:58 GMT
I think I understand.
You Press 'L' and leave it.
The system still thinks it is pressed.
I am not an expert on UCR. Is it possible that UCR emulates a constant press?
Question: Do you plug both keyboards to the PC? Not good. AFAIK, the system assumes a single KB.
|
|
|
|
Post by Shaul on Oct 15, 2019 21:17:16 GMT
Yes. I am leaving the key preesed cause the switch is on. On ucr i am seeing that the button is pressed wich is good but unfortanable windows still seeing the Vjoy as a keyboard. And yes both pc keyboards are puglled to the PC.  What is AFAIK? So you think that there is no a chances? Regards Luis |
|
