crabi
New Member
Posts: 2
|
Post by crabi on Jul 6, 2017 14:14:11 GMT
Hi @shaul ! Hope i can post there ^^ I posted on the UCR forum and evilC made me come there. So i have an issue with ScpVbus conflicting with another SCPVbus ! in fact i need the vxbox driver to work with UCR and SCPToolkit. I use 4 controllers : - 1 ps3 - 1 ps4 - and 2 xin-mo for my arcade panel I use SCPToolKit who install vxbox for my sony controllers, without that i can't use them. Then when i try to install another vxbox pad this time with UCR, a conflict happen and my sony pads don't work anymore. I suppose SCPToolkit use the exact same "driver" ! Do you think there is a solution to use scptoolkit and UCR at the same time ? Thanks in advance !
|
|
|
Post by Shaul (Admin) on Jul 8, 2017 6:40:35 GMT
Sounds logical to me that two drivers that bear the same name would not co-exist on the same machine. You will have to choose. I don't have an idea how to solve this conflict.
|
|
crabi
New Member
Posts: 2
|
Post by crabi on Jul 9, 2017 0:03:02 GMT
Ok, thanks for the answer i'll try to find another solution !
|
|