|
Post by amagicturtle on Oct 19, 2018 14:23:51 GMT
Hello all I seem to be having trouble getting the joy-cons to work. The left and right joy-con buttons work perfectly and have no problems, and the left joy-con Analogue stick has no problem either. However, the right joy-con Analogue stick has a problem with how it is registering. When i have the Vjoy monitor open it appears to be reading as a button as no matter how lightly i press in a direction it maxes out the read bars for Rx and Ry. Also, the axis' that are read are wrong. For example, when i press to the left it maxes out the Rx and Ry axis', when it should zero out the Rx. I am confused why one analogue reads correctly while the other works incorrectly, and if there's a way to fix this
|
|
|
Post by Shaul (Admin) on Oct 19, 2018 15:36:39 GMT
I am not familiar with joy cons. How do you use them with vJoy? Have you written a feeder? Seems like the problem is there, in the feeder.
|
|
|
Post by amagicturtle on Oct 22, 2018 13:06:40 GMT
The feeder i am using is the JoyCon-Driver from mfosse on github. I am using that with TocaEdit X360 Controller Emulator to convert the JoyCon Input into Xinput for steam. Most of everything is working fine, its just that one analogue stick im having trouble with.
|
|
|
Post by Shaul (Admin) on Oct 22, 2018 13:15:18 GMT
Well, seems like the feeder is not responding well for this axis. Either a bug in the feeder or some calibration issue. I'd try to start with debugging the feeder.
|
|
|
Post by amagicturtle on Oct 22, 2018 13:48:11 GMT
I figured as much. My problem is im not quite sure how to do that. I cant find any config files and all the other file types i have no means of reading and no experience in changing. The only files i have in the folder for the feeder is .dll files.
|
|